Fully Auto Galvanized Steel Cable Tray Cold Roll Forming Machine

Model NO.: SH-CT
Hydraulic Cutting Power: 11 Kw
Electrical Source: 380V, 50Hz, 3phase
Machine Weight: About 28 Tons
Control System: PLC with Touch Screen
Trademark: Suhang
Transport Package: Standard Package with Film, Plastic and Steel Wire
Specification: 15m*1.8m*1m
Origin: Wuxi, Jiangsu
HS Code: 8455229090
Model NO.: SH-CT
Hydraulic Cutting Power: 11 Kw
Electrical Source: 380V, 50Hz, 3phase
Machine Weight: About 28 Tons
Control System: PLC with Touch Screen
Trademark: Suhang
Transport Package: Standard Package with Film, Plastic and Steel Wire
Specification: 15m*1.8m*1m
Origin: Wuxi, Jiangsu
HS Code: 8455229090
                                Cable Tray Roll Forming Machine

1.  Machine Technical Data
 
  Items Specifications
Material of coil Material Thickness Grade 33 or grade 50 plain steel, galvanized steel, 
304 stainless steel, 316 stainless steel, and aluminum
  Width of the profile 100-1000mm
  Height of the profile 40-100mm
  Un Coiler 5 tons hydraulic
Forming system Rolling Speed 5-6m/min
  Roller Stations 20 stations
  Roller Material Gcr 15  with quenching 
 
  Shaft  Dia 90mm
  Maim Motor Power 22 kw
  Hydraulic cutting Power 11 kw
Cutting
system
Material Of Cutting CR12 with quench treatment
  Hardness HRC58-62
  Tolerance +-0.05mm
Electrical control system Electric Source 380V, 50HZ,3 phase 
Also can satisfy Customer's require
  Control System PLC (Panasonic) as list in the note
  Weight  About 18 tons 
  Profile adjustment Control by the motor
  Way Of Drive 1 inch single chain
  Size of machine Length 15000mm* Width 1800mm* Height 1000mm


2.  Main Components
 

Item Name:
Cable mounting system Roll Forming Line
Material: Galvanize steel 
Line Speed  1.5-4m/min
Material Coil width Per the design of product 100mm-800mm
Power 380V 3phase or design according to client's request
Gram Weight: Around 20 tons
Delivery time: about 60 working days
MOQ: 1 Set
Warranty 1 year (12 months)
 


 3. Working Flow  

Decoiler- Levelling- Servo Feeding- Punching- Main Roll Forming - Cutting- Runout Table

A. Passive Decoiler..........................................................To load and uncoiling material
(We also have Electric Decoiler and Hydraulic Decoiler to hold the heavy material.)

B. Servo Feeding Applicator............................................To feed the material accurately

C. Hydraulic/Press Punching...........................................To punch as requirements

D. Roll Forming Unit.........................................................To roll form as requirements

E. Hydraulic Cutting.........................................................To cut sheets as desired length
(We also have non-stop hydraulic cutting system.)

F. Output Table................................................................Support the finished products


 4. Application  
 
     In the electrical wiring of buildings, a cable tray system is used to support insulated electric cables used for power distribution and communication. Cable trays are used as an alternative to open wiring or electrical conduit systems, and are commonly used for cable management in commercial and industrial construction. They are especially useful in situations where changes to a wiring system are anticipated, since new cables can be installed by laying them in the tray, instead of pulling them through a pipe.
 


5.  Advantage for  Roll Forming Machine

1). Reasonable Price
2). High Quality
3). 12 Months Warranty
4). More Than 10 Years Experience
5). Durable
6). Reliable

   During the warranty period, maintain and change the spare parts for the customers for free (except for the instrument damage caused by human factors or natural disasters. ) And provide technical support for life-long.
   We can design and manufacture the machine according to clients' request! Our machines have passed CE, Guaranteed quality. Please send us the enquiry with Profile Drawing.



6.  After-sale Serive:

- The seller take responsibility to installation and commissioning of the equipment and free training. After machine arrive the destination, by the request of the buyer , the seller will provide 1 technical engineer to guide installation and training , and the buyer should give the technical person with full cooperated.
- Installation period: about 5 days after the complete preparation by the buyer such as the foundation and all necessary accessories.
- Training time: 5 days.
- Before departure of the engineers from seller, the buyer should pay for installation and commissioning fee 100$/day to the point account of the seller. The two-way ticket,visa, food, hotel , the translator and insurance are all should provide by buyer with full responsibility.
-The seller supply technical data (including forming mould drawing, electrical elements drawing and equipment drawing etc.)



7.  Company Profile

    Wuxi Suhang Machinery manufacturing Co., Ltd. is specialized in building materials of light steel structure. Since the factory founded 10 years before, it always designs and produces various type profile of roll forming machine.
     The main products of factory is Roller shutter door, PU sandwish panel line, pre-painted steel forming machine, Racking roll forming machine, the cable tray roll forming machine, Glazed Tile forming machine, Automatical C/Z Purlin forming machine, Floor Deck forming machine, Guardrail forming machine, Down Pipe forming machine, the whole carriage plate for car beam unit, Steel storage unit, etc. The products are widely used in warehouse, factory buildings, supermarket, Nursing homes, villas and other construction projects,  Our factory can meet the construction enterprises, automobile industry, Iron and steel production enterprises' growing demands.
     Suhang machinery is located in Wuxi city, Jiangsu province which is close to Shanghai,  It's about half an hour's journey. We enojoy the convenient transportation and advantageous location which supply good business opportunities for the buyers home and abroad.


8.    FAQ
 
1). Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
Besides, the width is adjustable.
 
2). Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world. We need your machines running in order to keep your business running.
 
3). How to visit your company?
Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Wuxi Station (30 minutes), then we can pick up you.
 
4). What can you do if the machine broken?
Our machines' warranty period is 12 months, if the broken parts can't repair, we will send the new parts replace the broken parts for free, but you need pay the express cost  If after warranty period, we can through negotiation to solve the problems, and we supply the technical support for the whole life of the machine.
 
5). Can you be responsible for transport?
Yes, please tell me the destination port or address. we have rich experience in transportation.
 
6). You are trade company or factory?
We are factories.
 
7). Why your price is higher than others?
As we persist on that factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality. We can make sure that our machine could use more than 20 years without any problem. 
 
8). How long the machine could be made?
Normally speaking, deck floor roll forming machine could be made about 60 working days. If you need machines in a hurry, we can try it short time                                 Cable Tray Roll Forming Machine

1.  Machine Technical Data
 
  Items Specifications
Material of coil Material Thickness Grade 33 or grade 50 plain steel, galvanized steel, 
304 stainless steel, 316 stainless steel, and aluminum
  Width of the profile 100-1000mm
  Height of the profile 40-100mm
  Un Coiler 5 tons hydraulic
Forming system Rolling Speed 5-6m/min
  Roller Stations 20 stations
  Roller Material Gcr 15  with quenching 
 
  Shaft  Dia 90mm
  Maim Motor Power 22 kw
  Hydraulic cutting Power 11 kw
Cutting
system
Material Of Cutting CR12 with quench treatment
  Hardness HRC58-62
  Tolerance +-0.05mm
Electrical control system Electric Source 380V, 50HZ,3 phase 
Also can satisfy Customer's require
  Control System PLC (Panasonic) as list in the note
  Weight  About 18 tons 
  Profile adjustment Control by the motor
  Way Of Drive 1 inch single chain
  Size of machine Length 15000mm* Width 1800mm* Height 1000mm


2.  Main Components
 

Item Name:
Cable mounting system Roll Forming Line
Material: Galvanize steel 
Line Speed  1.5-4m/min
Material Coil width Per the design of product 100mm-800mm
Power 380V 3phase or design according to client's request
Gram Weight: Around 20 tons
Delivery time: about 60 working days
MOQ: 1 Set
Warranty 1 year (12 months)
 


 3. Working Flow  

Decoiler- Levelling- Servo Feeding- Punching- Main Roll Forming - Cutting- Runout Table

A. Passive Decoiler..........................................................To load and uncoiling material
(We also have Electric Decoiler and Hydraulic Decoiler to hold the heavy material.)

B. Servo Feeding Applicator............................................To feed the material accurately

C. Hydraulic/Press Punching...........................................To punch as requirements

D. Roll Forming Unit.........................................................To roll form as requirements

E. Hydraulic Cutting.........................................................To cut sheets as desired length
(We also have non-stop hydraulic cutting system.)

F. Output Table................................................................Support the finished products


 4. Application  
 
     In the electrical wiring of buildings, a cable tray system is used to support insulated electric cables used for power distribution and communication. Cable trays are used as an alternative to open wiring or electrical conduit systems, and are commonly used for cable management in commercial and industrial construction. They are especially useful in situations where changes to a wiring system are anticipated, since new cables can be installed by laying them in the tray, instead of pulling them through a pipe.
 


5.  Advantage for  Roll Forming Machine

1). Reasonable Price
2). High Quality
3). 12 Months Warranty
4). More Than 10 Years Experience
5). Durable
6). Reliable

   During the warranty period, maintain and change the spare parts for the customers for free (except for the instrument damage caused by human factors or natural disasters. ) And provide technical support for life-long.
   We can design and manufacture the machine according to clients' request! Our machines have passed CE, Guaranteed quality. Please send us the enquiry with Profile Drawing.



6.  After-sale Serive:

- The seller take responsibility to installation and commissioning of the equipment and free training. After machine arrive the destination, by the request of the buyer , the seller will provide 1 technical engineer to guide installation and training , and the buyer should give the technical person with full cooperated.
- Installation period: about 5 days after the complete preparation by the buyer such as the foundation and all necessary accessories.
- Training time: 5 days.
- Before departure of the engineers from seller, the buyer should pay for installation and commissioning fee 100$/day to the point account of the seller. The two-way ticket,visa, food, hotel , the translator and insurance are all should provide by buyer with full responsibility.
-The seller supply technical data (including forming mould drawing, electrical elements drawing and equipment drawing etc.)



7.  Company Profile

    Wuxi Suhang Machinery manufacturing Co., Ltd. is specialized in building materials of light steel structure. Since the factory founded 10 years before, it always designs and produces various type profile of roll forming machine.
     The main products of factory is Roller shutter door, PU sandwish panel line, pre-painted steel forming machine, Racking roll forming machine, the cable tray roll forming machine, Glazed Tile forming machine, Automatical C/Z Purlin forming machine, Floor Deck forming machine, Guardrail forming machine, Down Pipe forming machine, the whole carriage plate for car beam unit, Steel storage unit, etc. The products are widely used in warehouse, factory buildings, supermarket, Nursing homes, villas and other construction projects,  Our factory can meet the construction enterprises, automobile industry, Iron and steel production enterprises' growing demands.
     Suhang machinery is located in Wuxi city, Jiangsu province which is close to Shanghai,  It's about half an hour's journey. We enojoy the convenient transportation and advantageous location which supply good business opportunities for the buyers home and abroad.


8.    FAQ
 
1). Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
Besides, the width is adjustable.
 
2). Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world. We need your machines running in order to keep your business running.
 
3). How to visit your company?
Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Wuxi Station (30 minutes), then we can pick up you.
 
4). What can you do if the machine broken?
Our machines' warranty period is 12 months, if the broken parts can't repair, we will send the new parts replace the broken parts for free, but you need pay the express cost  If after warranty period, we can through negotiation to solve the problems, and we supply the technical support for the whole life of the machine.
 
5). Can you be responsible for transport?
Yes, please tell me the destination port or address. we have rich experience in transportation.
 
6). You are trade company or factory?
We are factories.
 
7). Why your price is higher than others?
As we persist on that factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality. We can make sure that our machine could use more than 20 years without any problem. 
 
8). How long the machine could be made?
Normally speaking, deck floor roll forming machine could be made about 60 working days. If you need machines in a hurry, we can try it short time