1. Multiple functions combined in one, it can deal with many problems just with 1 machine, economical assistant tool for smart phone repair. 2. The application of advanced glue removing technology, this machine can remove glue effectively. 3. 2 small pillars on the sides of operating plate, it can avoid the damage of steel wires when separating screen and it is helpful for operating safety. Suitable for iPhone/Samsung phones repair. 4. The shell of vacuum LCD Separator is metal. And it's better than back light vacuum LCD Separator. 5. The vacuum LCD separator equip with four bearings. It's more convenient when separating. 6. The LCD separator equip with anti-slip mounting seats. It makes your work smoothly and decreases the opportunity of damaging LCD assembly. 7. This machine set can help separate the cell phone's touch screen from LCD, or from front glass lens. 8. Come with 5 phone moulds: upper mold for iPhone6, lower molds for iPhone4/5/6(4.7)/6(5.5).  Specifications: 1. Dimensions: (12.99 x 13.78 x 16.73)" / (33 x 35 x 42.5)cm (L x W x H) 11. Temperature Setting Rrovides Two Modes: Normal Setting and Set in a Timely Manne  Screen Repair LCD Separator Remove Glue Frame Machine for iPhone G1L9   Package Includes: 1. Multiple functions combined in one, it can deal with many problems just with 1 machine, economical assistant tool for smart phone repair. 2. The application of advanced glue removing technology, this machine can remove glue effectively. 3. 2 small pillars on the sides of operating plate, it can avoid the damage of steel wires when separating screen and it is helpful for operating safety. Suitable for iPhone/Samsung phones repair. 4. The shell of vacuum LCD Separator is metal. And it's better than back light vacuum LCD Separator. 5. The vacuum LCD separator equip with four bearings. It's more convenient when separating. 6. The LCD separator equip with anti-slip mounting seats. It makes your work smoothly and decreases the opportunity of damaging LCD assembly. 7. This machine set can help separate the cell phone's touch screen from LCD, or from front glass lens. 8. Come with 5 phone moulds: upper mold for iPhone6, lower molds for iPhone4/5/6(4.7)/6(5.5).  Specifications: 1. Dimensions: (12.99 x 13.78 x 16.73)" / (33 x 35 x 42.5)cm (L x W x H) 11. Temperature Setting Rrovides Two Modes: Normal Setting and Set in a Timely Manne  Screen Repair LCD Separator Remove Glue Frame Machine for iPhone G1L9   Package Includes:
Features:
Â
2. Material: Stainless Steel & Aluminum Alloy
3. Color: Golden & Black
4. Weight: 469.14oz / 13300g
5. Model: PSD968ZD+
6. Voltage: 110V
7. Frequency: 50/60Hz
8. Power: 800W
9. Plug Type:Â US Plug
10. Moulds Type: iPhone 6/6S Upper Mould, iPhone 4/4S Lower Mould, iPhone 5/5C/5S Lower Mould, iPhone6/6S Lower Mould, iPhone 6 Plus/6S Plus Lower Mould
Middle frame separation steps:
1. Turn on the thermostat switch of heated plate, then set the temperature to 80°C.
2. Use a sealed bag, make the adhesive gap around and back of the assembly coated with whellote gas, then seal the bag. 3. Take out the assembly after 5min.
4. Heat it on the heated plate about 20s, turn on the corresponding mould switch, press the assembly on the suction mould. 5. After being sucked, separating the middle frame slowly by hand.
Screen separation steps:
1. Turn on the thermostat switch of heated plate, then set the temperature to 80°C.
2. Haul back the lower plate, lock the screw tightly(prevent sliding). Put the silicone pad on the heated plate holes to holes, then place the screen on it.
3. Turn on the suction switch, the screen will be sucked tightly. When the screen reaches an appropriate temperature, start to separate the screen with a steel wire.
Glue removing steps:
1. Loose the three screws of the blade groove, put in the blade and screw it.
2. Turn on the thermostat switch of glue remover on the right side, set the temperature to 180°C.
3. Put the silicone pad on the heated plate, when it reaches to required temperature, put into the screen with the flex cable inby.
4. Push into the screen, keep the height of the blade and the screen be the same, then move the screen to remove the glue.
Frame press and laminating steps:
1. Turn on the thermostat switch on the right mould, set the temperature to 180°C.
2. Choose a lower mould, put the lower mould into the plate(the groove of the mould keep downward), push the lower mould to align with the upper mould, then fix the screws behind the lower mould.
3. After installing the frame of the screen, put it into the lower mould in the right direction. Put the lower mould on the plate in the right position, the upper mould press it for 6-10s, then take out the screen.
4. When laminating for iPhone6(4.7), it need to install the upper mould.
1 x 5 in1 Observing Seperator Bracket Machine
1 x US Standard Power Line
2 x Split-screen Bars
1 x Adsorption Silicone Pad
1 x Steel Wire
4 x Tools
5 x Moulds
Features:
Â
2. Material: Stainless Steel & Aluminum Alloy
3. Color: Golden & Black
4. Weight: 469.14oz / 13300g
5. Model: PSD968ZD+
6. Voltage: 110V
7. Frequency: 50/60Hz
8. Power: 800W
9. Plug Type:Â US Plug
10. Moulds Type: iPhone 6/6S Upper Mould, iPhone 4/4S Lower Mould, iPhone 5/5C/5S Lower Mould, iPhone6/6S Lower Mould, iPhone 6 Plus/6S Plus Lower Mould
Middle frame separation steps:
1. Turn on the thermostat switch of heated plate, then set the temperature to 80°C.
2. Use a sealed bag, make the adhesive gap around and back of the assembly coated with whellote gas, then seal the bag. 3. Take out the assembly after 5min.
4. Heat it on the heated plate about 20s, turn on the corresponding mould switch, press the assembly on the suction mould. 5. After being sucked, separating the middle frame slowly by hand.
Screen separation steps:
1. Turn on the thermostat switch of heated plate, then set the temperature to 80°C.
2. Haul back the lower plate, lock the screw tightly(prevent sliding). Put the silicone pad on the heated plate holes to holes, then place the screen on it.
3. Turn on the suction switch, the screen will be sucked tightly. When the screen reaches an appropriate temperature, start to separate the screen with a steel wire.
Glue removing steps:
1. Loose the three screws of the blade groove, put in the blade and screw it.
2. Turn on the thermostat switch of glue remover on the right side, set the temperature to 180°C.
3. Put the silicone pad on the heated plate, when it reaches to required temperature, put into the screen with the flex cable inby.
4. Push into the screen, keep the height of the blade and the screen be the same, then move the screen to remove the glue.
Frame press and laminating steps:
1. Turn on the thermostat switch on the right mould, set the temperature to 180°C.
2. Choose a lower mould, put the lower mould into the plate(the groove of the mould keep downward), push the lower mould to align with the upper mould, then fix the screws behind the lower mould.
3. After installing the frame of the screen, put it into the lower mould in the right direction. Put the lower mould on the plate in the right position, the upper mould press it for 6-10s, then take out the screen.
4. When laminating for iPhone6(4.7), it need to install the upper mould.
1 x 5 in1 Observing Seperator Bracket Machine
1 x US Standard Power Line
2 x Split-screen Bars
1 x Adsorption Silicone Pad
1 x Steel Wire
4 x Tools
5 x Moulds
5in1 LCD Touch Screen Glass Frame Machine Separator
Model NO.: 5he1
Trademark: VEVOR
Origin: China
Model NO.: 5he1
Trademark: VEVOR
Origin: China
5 in 1 frame machine consists of heated plate, a-frame separator, manual vacuum separator, glue remover and frame pressing laminator. This machine set can help separate the cell phone's touch screen from LCD, or from front glass lens. There is no need any clamps to press the LCD screen due to the built-in vacuum pump, it is much more convenient for your mobile phone repairing. Our machine is compatible with all mobile phones 6P and below, used to separate broken glass from lens, touch screen and LCD display assembly. You can easily remove the damaged glass and replace it reducing cost and wait time. The heating plate is made of integrative non-pressurized aluminum-alloy with well-distributed heat conduction which is not distorted under high temperature. By using this machine, you can separate the broken glass from the LCD display assembly much easy. The unit heats up the screen assembly to loosen the glue, so that you can remove it with a molybdenum cutting wire. With a LCD dispay, you may adjust the temperature much more accurate and easier.
5 in 1 frame machine consists of heated plate, a-frame separator, manual vacuum separator, glue remover and frame pressing laminator. This machine set can help separate the cell phone's touch screen from LCD, or from front glass lens. There is no need any clamps to press the LCD screen due to the built-in vacuum pump, it is much more convenient for your mobile phone repairing. Our machine is compatible with all mobile phones 6P and below, used to separate broken glass from lens, touch screen and LCD display assembly. You can easily remove the damaged glass and replace it reducing cost and wait time. The heating plate is made of integrative non-pressurized aluminum-alloy with well-distributed heat conduction which is not distorted under high temperature. By using this machine, you can separate the broken glass from the LCD display assembly much easy. The unit heats up the screen assembly to loosen the glue, so that you can remove it with a molybdenum cutting wire. With a LCD dispay, you may adjust the temperature much more accurate and easier.