Suncenter 100 Psi-10000 Psi Range High Pressure Piston Air Compressor Pump

November 23, 2022

Model NO.: DGT60
Material: Stainless Steel
Certificate: Ce RoHS
Power: Pneumatic
Standard or Nonstandard: Standard
Trademark: SUNCENTER
Transport Package: 1 Set/Case by Plywood Case
Origin: China
Model NO.: DGT60
Material: Stainless Steel
Certificate: Ce RoHS
Power: Pneumatic
Standard or Nonstandard: Standard
Trademark: SUNCENTER
Transport Package: 1 Set/Case by Plywood Case
Origin: China
Suncenter 100 psi-10000 psi range high pressure piston air compressor pump

Compressed Air Driven Gas Booster Pump- DGA/DGD/DGT Series 

Suncenter Air Driven Gas Boosters provide for pressures up to 80Mpa (11,600 psi). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include: 
 
  1. Compressed Air driven - no electricity required (connect to normal air compressor)
  2. In order to extend the lifetime of the pump, the driving air pressure should 
not be higher than 8 bar
  1. No airline lubricator required 
  2. Hydrocarbon free - separation between air and gas sections 
  3. Pressures to 80Mpa (11,600 psi)  
  4. Wide range of models with different ratios
  5. Built-in-cooling on most models 
  6. Easy to install, operate and maintain
  7. Best price / performance ratio 
  8. No heat, flame or spark risk and explosion proof 
  9. Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter   pump will automatically start, keep the loop pressure constant
  10. Applicable gas: Argon/Helium/Hydrogen/Oxygen/NO2/CH4/LNG/LPG/CNG/FM200 etc.

Applications for Air Driven Gas Boosters
SUNCENTER Air Driven Gas Boosters provide for pressures up to 80Mpa. Used for oil free compression not only of air or Nitrogen, but also flammable and risk gases like hydrogen, oxygen and natural gas. These boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging.

Air driven boosters are an efficient alternative instead of electrically driven products and can be used in explosion- proof areas.

As a result of the wide range of models it is possible to select the optimum booster for each application. Single stage, double acting or two stage boosters or a combination of these models can be used to achieve different operating pressures and flow capacities. 

SUNCENTER Air Driven Gas Boosters are ideal and widely used for hydrostatic and burst testing for valves, pipes, tubing and pressure vessels; Calibration for safety valves; Automobile regulator detecting and telecommunication cable inflatable appliances. 
      
                       
Applications 
 
  1. Pressure test with gas
  2. Gas transfer and filling
(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)
  1. Charging of gas cylinder and accumulator with nitrogen
  2. Supply for isolating gas systems
  3. Gas assisted injection molding
  4. Transfer of oxygen cylinders
  5. Charging of breathing air bottles
  6. Leak test 
  7. Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, BOPs, gas bottles and air craft components
  8. Safety valve adjusting 
 
Suncenter 100 Psi-10000 Psi Range High Pressure Piston Air Compressor Pump



DGA series gas booster pumps(Single acting, single air drive head): 
DGA pumps are available with high quality seals, which provide significantly better service life as well. Pump head fitted with exhaust cooling devices. All parts in contact with the gas are made of stainless steel.



Suncenter 100 Psi-10000 Psi Range High Pressure Piston Air Compressor Pump

 
Model Pressure boost ratio Min. gas
Inlet pressure
PA (bar) 		Max.gas
Inlet pressure
PA (bar) 		Max. gas
outlet pressure PB (bar)
Driven air pressure  PL 		Formula to
calculate gas outlet pressure PB 		Connection:
Gas Inlet /
Gas outlet (NPT thread) 		Max. flow at driven air pressure of 6bar (L/min)
DGA02 2:1 1.0 16 16 2bar-8 bar 2X PL 1/2 / 1/2 960 (at PA of 6 bar )
DGA05 5:1 0 40 40  2bar-8 bar 5XPL 1/2 / 1/2 680(at PA of 6 bar )
DGA06 6:1 2.0 48 48 2bar-8 bar 6XPL 1/2 / 1/2 360(at PA of 10 bar )
DGA10 10:1 3.5 80 80 2bar-8 bar 10XPL 3/8/ 3/8 210(at PA of 10 bar )
DGA25 25:1 7.0  200 200  2bar-8 bar 25XPL 1/4/ 1/4 120(at PA of 20 bar )
DGA40 40:1 10 320 320 2bar-8 bar 40XPL 1/4/ 1/4 200(at PA of 40 bar )
DGA60 60:1 20  480 480  2bar-8 bar 60XPL 1/4/ 1/4 180(at PA of 40 bar )
DGA100 100:1 25 800 800 2bar-8 bar 100XPL 1/4/ M14X1.5 136(at PA of 40 bar )
Technical spcification
Note:  PL: driven air pressure   PA: gas inlet pressure   PB: gas outlet pressure  
In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 bar
DGD series gas booster pumps(Double acting ):
DGD series pumps are double acting, with single air driven heads type.   
  1. DGD pumps are available with high quality seals, which provide significantly better service life
  2. Double pump heads with exhaust cooling devices. 
  3. All components in contact with the gas are made of stainless steel. 
  4. Pipes mounting way are available as customized. 
Suncenter 100 Psi-10000 Psi Range High Pressure Piston Air Compressor Pump

 
Model Pressure boost ratio Min. gas
Inlet pressure
PA (bar) 		Max.gas
Inlet pressure
PA (bar) 		Max. gas
outlet pressure PB (bar)
Driven air pressure  PL 		Formula to
calculate gas outlet pressure PB 		Connection:
Gas Inlet /
Gas outlet (NPT thread) 		Max. flow at driven air pressure of 6bar (L/min)
DGD10 10:1 3.5 80 80  2bar-8 bar 10XPL+ PA 3/8/3/8 410(at PA of 6 bar )
DGD25 25:1 10  200 200  2bar-8 bar 25XPL+ PA 1/4/1/4 396(at PA of 20 bar )
DGD40 40:1 15  320 320  2bar-8 bar 40XPL+ PA 1/4/1/4 320(at PA of 40 bar )
DGD60 60:1 25  480 480  2bar-8 bar 60XPL+ PA PVC Food Grade

PVC sheet is a widely used and popular material. PVC Film can be divided into food grade and industrial grade, and it can be made into transparent, colorful, anti-static, gold-plated, flocking, etc. For vacuum forming, its main characteristics are high transparency, good surface gloss, less crystal points, small water lines, wide use, strong impact resistance, and easy molding. The finished product meets the US FDA and Japanese PL food hygiene standards. It is widely used in the outer packaging of toys, food, electronic products, medicine, electrical appliances, gifts, cosmetics, stationery and other products.


The main classification of blister products
1. If classified according to the thickness of the material, it can be divided into
A. The thickness of ordinary thin blister is 0.14~5.0mm-mainly made of various materials and effects such as PVC, PP, PS (HIPS), PET (including APET and PETG), PE, BOPS and recyclable paper trays Folding, half-folding, three-folding, cylinder, folding box, heaven and earth box, high frequency and other non-thermoformed blister products are widely used in food, medicine, electronics, toys, computers, daily necessities, cosmetics, machinery hardware and other industries.
B. The thickness of the special thick blister is 0.14~5.0mm-mainly the plastic injection products with various materials and effects such as PVC, PP, PS (HIPS), PET), ABS, PC, PE, etc.
The reason for not classifying the types of materials is mainly considering that there are some differences between the materials used in ordinary thin blister and special thick blister, but PVC, PP, PS and PET are all in these two types of blister products. To have a role to play!
PVC hard film has moderate toughness and is not easy to burn. It will produce chlorine when burned, which will affect the environment. PVC is easy to heat and can be sealed with a sealing machine and high-frequency machine. It is the main raw material for producing transparent plastic products.
PS hard film has low density, poor toughness, easy to burn, and will produce styrene gas (a harmful gas) when burned, so it is generally used to produce various industrial blister trays.
PET hard film has good toughness, high transparency, easy to burn, and does not produce harmful gas when burned. It is an environmentally friendly material, but the price is high, and it is suitable for high-end blister products. The blister blister in European and American countries generally requires PET hard film, but It is not easy to heat seal, which brings great difficulties to packaging. In order to solve this problem, people compound a layer of PVC film on the surface of PET, named PETG rigid sheet, but the price is higher.
Pet Film Polyethylene Terephthalate 9

Pvc Food Grade Film,Polyolefin Film Products,Fresh Produce Packaging Film,Transparent Pvc Films Roll

Shandong Top Leader Plastic Packing CO., LTD , https://www.sdzlplastic.com