Standard 304 Stainless Steel trailer side bar door lock is one of our best selling products. With the security key, it makes our door much safer. We can have different keys for one product. Also we can have the same key for one product. Our locks are widely used on refrigerated trucks, freezers, van boxes, containers, pickup truck toolboxes and other commercial vehicles.
304 Stainless Steel Locks With Key 304 Stainless Steel Locks With Key Jiaxing Ganland Auto Parts Co., Ltd. , http://www.gltruckparts.com
The MIG series inverter pulse MIG/MAG arc welder has welding methods such as pulse MIG, high-speed pulse MIG, and root welding. The pulsed MIG welding method can realize the welding of carbon steel and stainless steel, and the MIG welding method can realize carbon steel argon-rich and CO2 gas shielded welding.
Host control panel
Main features:
1.High-end dual 32-bit CPU full digital control.
2.The newly developed low spatter waveform control technology, combined with electronic reactor control technology and droplet detection technology.
3.The high-speed pulse is a high-energy density concentrated arc that significantly increases the welding speed and increases the welding speed by 30%.
4.It is especially suitable for the welding of narrow gap welds. When the welding wire is extended for a long distance, the welding nozzle still maintains stable welding.
5.Excellent arc handling performance and high arc stability. It can save raw materials, and the plate requires only 40 degrees of groove to meet the corresponding welding requirements.
6.The deformation amount is small, the welding speed is fast, and the forming is beautiful.
7.The high-speed pulse penetration is significantly larger than the penetration of the conventional gas shielded welding process, and the 15 mm steel plate can be penetrated at one time.
Technical parameters:
Order No
030001058
Model
MIG-500G
Rated input voltage/frequency
3-380V +-15%Â 50/60Hz
Rated input power(KVA)
26.1
Rated input current(A)
37.7
Rated duty cycle(%)
60
Open-load voltage(V)
80+-8
Output current range(A)
25-500
Output voltage range(V)
15.2-39
Power factor
0.99
Wire diameter(mm)
0.6-1.6
Torch cool methodÂ
water cooling or air cooling
Enclosure protection degree
IP21
Insulation grade
F
Power supply dimension W*D*H(mm)
560*1080*1200
Power source N.W(KG)
107
Standard configuration:
1.Air cooling wire feeder 1 set(5 meter cable)
2.3 meter air cooling welding gun( Panasonic interface)
3.2 m ground cable 1 set
4.CO2 gas meter 1 piece(AC36V,25L/MIN) or Argon meter 1 pcs.
About CHD
Founded in 1989, WenZhou CHD Welding Equipment Factory is China's famous cutting machine, beveling machine, welding machine and accessories manufacturer, with 3 production bases located in Shanghai, Wenzhou and Chengdu and plant area of 53,000 square meters.have passed authoritative certification such as the ISO9001 and Switzerland SGS, France BV.10 kind of products has passed  the EU CE certification.Wenzhou CHD have applied for more than 10 patents, have participated in the drafting of three Chinese national standards, been rated as famous brand in Shanghai. With marketing and service agencies covering more than 70 countries.
Exhibition
CHD have participated in all kinds of the welding exhibitions more than 100 times since 1989 when enterprise started to run over the last decade.we attend at least 6 exhibitions annually.Â
1989-2015 all the Beijing Essen Welding&Cutting Exhibitions
1989-2015 all the China welding expositions.
and exhibitions in Russia,Austrilia,India,Brazil,Vietnam&all over the mainland China.
Â
Product summary
The MIG series inverter pulse MIG/MAG arc welder has welding methods such as pulse MIG, high-speed pulse MIG, and root welding. The pulsed MIG welding method can realize the welding of carbon steel and stainless steel, and the MIG welding method can realize carbon steel argon-rich and CO2 gas shielded welding.
Host control panel
Main features:
1.High-end dual 32-bit CPU full digital control.
2.The newly developed low spatter waveform control technology, combined with electronic reactor control technology and droplet detection technology.
3.The high-speed pulse is a high-energy density concentrated arc that significantly increases the welding speed and increases the welding speed by 30%.
4.It is especially suitable for the welding of narrow gap welds. When the welding wire is extended for a long distance, the welding nozzle still maintains stable welding.
5.Excellent arc handling performance and high arc stability. It can save raw materials, and the plate requires only 40 degrees of groove to meet the corresponding welding requirements.
6.The deformation amount is small, the welding speed is fast, and the forming is beautiful.
7.The high-speed pulse penetration is significantly larger than the penetration of the conventional gas shielded welding process, and the 15 mm steel plate can be penetrated at one time.
Technical parameters:
Order No
030001058
Model
MIG-500G
Rated input voltage/frequency
3-380V +-15%Â 50/60Hz
Rated input power(KVA)
26.1
Rated input current(A)
37.7
Rated duty cycle(%)
60
Open-load voltage(V)
80+-8
Output current range(A)
25-500
Output voltage range(V)
15.2-39
Power factor
0.99
Wire diameter(mm)
0.6-1.6
Torch cool methodÂ
water cooling or air cooling
Enclosure protection degree
IP21
Insulation grade
F
Power supply dimension W*D*H(mm)
560*1080*1200
Power source N.W(KG)
107
Standard configuration:
1.Air cooling wire feeder 1 set(5 meter cable)
2.3 meter air cooling welding gun( Panasonic interface)
3.2 m ground cable 1 set
4.CO2 gas meter 1 piece(AC36V,25L/MIN) or Argon meter 1 pcs.
About CHD
Founded in 1989, WenZhou CHD Welding Equipment Factory is China's famous cutting machine, beveling machine, welding machine and accessories manufacturer, with 3 production bases located in Shanghai, Wenzhou and Chengdu and plant area of 53,000 square meters.have passed authoritative certification such as the ISO9001 and Switzerland SGS, France BV.10 kind of products has passed  the EU CE certification.Wenzhou CHD have applied for more than 10 patents, have participated in the drafting of three Chinese national standards, been rated as famous brand in Shanghai. With marketing and service agencies covering more than 70 countries.
Exhibition
CHD have participated in all kinds of the welding exhibitions more than 100 times since 1989 when enterprise started to run over the last decade.we attend at least 6 exhibitions annually.Â
1989-2015 all the Beijing Essen Welding&Cutting Exhibitions
1989-2015 all the China welding expositions.
and exhibitions in Russia,Austrilia,India,Brazil,Vietnam&all over the mainland China.
Â
industrial high speed inverter pulsed MIG welder for aluminum steel welding
Model NO.: MIG-500G
welding material: steel,aluminum,stainless steel
speed: high speed
Splash: No Splash
Trademark: CHD
Transport Package: Carton Box
Specification: 560*1080*1200
Origin: Shanghai China
HS Code: 8515319900
Model NO.: MIG-500G
welding material: steel,aluminum,stainless steel
speed: high speed
Splash: No Splash
Trademark: CHD
Transport Package: Carton Box
Specification: 560*1080*1200
Origin: Shanghai China
HS Code: 8515319900
Product summary