When it comes to smog, I think of Beijing. Looking at the trends in recent years, smog is no longer unique to Beijing. As in the north, there are severe haze events in many areas, affecting travel and affecting vehicles at the same time. Driving safety. Then how do drivers drive safely? Xiao Bian summed up the four skills and provided a reference for everyone. First, control the speed, keep the distance In the case of hazy weather, the visibility on the road surface is very low. In this case, the driver should control the speed and keep the distance. In the visibility range of 100 to 200 meters, the speed should be within 60 kilometers/hour, the safety distance should be about 100 meters, and the visibility should be within 50 kilometers/hour, and the speed must be within 40 kilometers/hour. Distance is about 50 meters. Second, to avoid emergency braking Drivers are in hazy weather, due to the poor line of sight environment, the judgment of the vehicle distance will often appear a certain degree of deviation, at this time, it must not be urgently formulated, so as not to lead to rear-end accidents. If you need to make an emergency, please also go slowly, slowly, slowly, step by step... Third, do not use high beam In high haze weather, the penetrating power of high-beam lights is extremely poor. If high-beam lights are used, white light will be created in front of them, affecting both the driving and the driving of the opposite vehicles. The correct approach is: open front and rear fog lights, taillights and low beam lights, and at the same time can properly open the double flash, supplemented by horn tips, so that traffic and pedestrians as far as possible clearly your vehicle position, to protect traffic safety. four. Correct choice of driving lane In fog and haze weather, it is best to follow the cross principle when selecting lanes for driving, that is, two lanes are selected on the outside and three lanes are selected. For their own and other people's lives and property safety should not be overtaking, speeding, etc., if it is the case, it is best to slow down to avoid, or simply stop by the side, safety first thing. Zinc or Nickel Plating Production Line
Metal electroplating line is widely used in aircraft and auto parts, machinery parts, metal, hardware processing industries, including cooper plating, silver plating, zinc plating, nickel plating, gold plating, chrom plating, anodizing, electrophoresis production line,etc.
Zinc-nickel alloy is an anti-corrosion coating with excellent corrosion resistance. At the same time, it has good mechanical properties and does not change the mechanical properties of the steel after plating. It has excellent brazing properties and is easy to weld under various conditions. The internal stress of the coating is small, which is comparable to that of the cadmium coating in the torsion-tension test. The plating solution has good dispersing ability and covering ability, high current efficiency, bright and smooth coating.
The surface condition and processing requirements during electroplating, select the appropriate steps, and perform the necessary finishing processing on the surface of the part, so that the part has a smooth and clean surface, which is an important link in obtaining a high-quality coating. Zinc Or Nickel Plating Production Line,Zinc Plating Line,Zinc Plating Production Line,Nickel Treatment Production Line Wuxi Xingyi Intelligent Environment Protection Equipment Co.,Ltd. , https://www.wxxingyi.com
The zinc-nickel alloy plating bath has weak acid chloride type, sulfate type and alkaline zinc acid type.