There are many reasons why the brakes of the medical waste transfer vehicle fail to work during the daily driving process. For example, the vacuum booster pump fails, there are too many impurities in the brake master cylinder, or the seal is not strict, and the piping interface and gas storage Any leak in the tank will cause the brake to fail. The most common failure of the brake is the improper operation of the driving mechanism, which leads to the failure of the mechanism. Under long-term friction and heat generation conditions, the brake will appear to be charring, which will completely disable the brake function. What should happen to the sudden failure of the medical waste transfer vehicle during driving? 1, according to the road conditions and the direction of speed control, release the high speed gear, at the same time can be a very quick boom of empty oil, high-speed gear change low gear, so the engine will have a larger traction resistance The speed will be reduced immediately. 2, in the downshift, it should be combined with handbrake, but when using the handbrake should be careful not to pull too tight, can not pull too slow, if pulled too tight, Then there is a possibility that the transmission member will eventually lose its ability to brake. Pulling too slowly will also cause the disc to wear and burn and lose braking performance. 3. The friction and collision between the steel parts of the medical waste transfer car's compartments, bumpers, etc. and the trees, rocks, and earth slopes make the medical waste transfer vehicle achieve a purpose of forcible parking off line, and it can also be as far as possible. Reduce the loss of accidents. 4. If the medical waste transfer vehicle has experienced a brake failure while climbing uphill, it should be reduced to mid-range or resisted when it should be adapted. Can ensure that there is enough power to drive the vehicle to the top of the slope to park. If it is necessary to park on a half slope, then it is necessary to maintain a forward low position and tighten the hand brake. The occupants can use rocks or wooden blocks to hold the wheels. . (Text / Sun Ni) Lost Wax Steel Casting,Stainless Steel Lost Wax Casting,Lost Wax Casting Steel,Precision Lost Wax Casting Wuxi Zhenzhe Electric Power Technology Co.,Ltd , https://www.zhenzhecasting.com
