1-Phase 220V IGBT HF TIG Welding Machine (TIG-200)

August 09, 2023

Model NO.: TIG-200
HS Code: 8515319000
Model NO.: TIG-200
HS Code: 8515319000
Features:
1. Adopting the IGBT module and the special half-bridge inverter technology, frequency as high as 30kHz
2. Support MMA welding and TIG welding. In MMA welding, can work long hours, with duty cycle as high as 50%
3. In TIG welding, arc started by HF, arc can be started at the lowest current of 5A, high success rate in arc starting
4. In TIG welding, short welding and long welding supported
5. In long welding, arc-start current, welding current and collection current can change mutually
6. Time for pre-gas sending or post-gas sending can be set
7. With input of 1-phase 220V/240V, a fluctuation range of 15% is allowable
8. Auto protection from over/under-phase, overheat and over-current
9. Small, light and easy to operate, high reliability

1-Phase 220V IGBT HF TIG Welding Machine (TIG-200)
                  Model
Content		 TIG-160S TIG-180S TIG-200S
Power 1-phase  220V/50Hz  /60Hz,   1-phase  240V/50Hz/60Hz
Input  capacity 3.3KVA/5.3KVA 3.9KVA/6.2KVA 4.5KVA/7.5KVA
Input  current 15A/24.3A 17.8A/28.2A 20.7A/34A
Rated  welding  volt. TIG 160A/16.4V 180A/17.2V 200A/18V
MMA 160A/26.4V 180A/27.2V 180A/27.2V
Rated  current TIG 5A-160A 5A-180A 5A-200A
MMA 5A-160A 5A-180A 5A-180A
Arc-start.   curr. 5A-160A 5A-180A 5A-200A
Arc-collection  curr. 5A-160A 5A-180A 5A-200A
Pre-gas-sending  time 0.3S
Post-gas-sending  time 6S  or  10S
Rated  duty  cycle 50%
Efficiency 85%
Air  Switch 32A 40A 40A
Input  cable 2× 4+1× 1.5mm
Raising  means Handle
Insulation  class F
Protection  class IP21
External  feature Fall
Dimensions(mm) 405× 173× 370
Weight(Kg) 14 15 16
Features:
1. Adopting the IGBT module and the special half-bridge inverter technology, frequency as high as 30kHz
2. Support MMA welding and TIG welding. In MMA welding, can work long hours, with duty cycle as high as 50%
3. In TIG welding, arc started by HF, arc can be started at the lowest current of 5A, high success rate in arc starting
4. In TIG welding, short welding and long welding supported
5. In long welding, arc-start current, welding current and collection current can change mutually
6. Time for pre-gas sending or post-gas sending can be set
7. With input of 1-phase 220V/240V, a fluctuation range of 15% is allowable
8. Auto protection from over/under-phase, overheat and over-current
9. Small, light and easy to operate, high reliability

1-Phase 220V IGBT HF TIG Welding Machine (TIG-200)
                  Model
Content		 TIG-160S TIG-180S TIG-200S
Power 1-phase  220V/50Hz  /60Hz,   1-phase  240V/50Hz/60Hz
Input  capacity 3.3KVA/5.3KVA 3.9KVA/6.2KVA 4.5KVA/7.5KVA
Input  current 15A/24.3A 17.8A/28.2A 20.7A/34A
Rated  welding  volt. TIG 160A/16.4V 180A/17.2V 200A/18V
MMA 160A/26.4V 180A/27.2V 180A/27.2V
Rated  current TIG 5A-160A 5A-180A 5A-200A
MMA 5A-160A 5A-180A 5A-180A
Arc-start.   curr. 5A-160A 5A-180A 5A-200A
Arc-collection  curr. 5A-160A 5A-180A 5A-200A
Pre-gas-sending  time 0.3S
Post-gas-sending  time 6S  or  10S
Rated  duty  cycle 50%
Efficiency 85%
Air  Switch 32A 40A 40A
Input  cable 2× 4+1× 1.5mm
Raising  means Handle
Insulation  class F
Protection  class IP21
External  feature Fall
Dimensions(mm) 405× 173× 370
Weight(Kg) 14 15 16

Pearlescent Pigment

Pearlescent Pigment ,Colorshift Pearl Pigment,Mica Pearlescent Pigments,Pearl Paint Pigment

lilygroup Co.,Ltd , https://www.lilychemical.com