In today’s technology- and web-based society, being away from the Internet will gradually lag behind others. As a large-scale industry platform, China Cutter Trading Network has carefully arranged reader-related information news for readers, so stay tuned. /Article1 Restaurant Kaiten Conveyor Belt Restaurant Kaiten Conveyor Belt,Smart Conveyor Sushi Equipment,Smart Sushi Equipment,Fresh Food Conveyor Belt Guangzhou Yuyang Food Machinery Co., Ltd , https://www.yysushibelt.com
How to maintain aluminum cutting machine?
1, daily inspection of aluminum cutting machine oil cup whether there is no lubricating oil, our company uses 20# air pressure lubricating oil, should maintain seven full, avoid air pressure parts without lubricating oil and reduce the service life, check whether the pressure is maintained 6 -7kg of pressure can be used to operate, too much pressure or too small easy to damage the air pressure parts, the water filter of the machine has an automatic row of water features, if you can not automatically drain, please replace the water filter device, to avoid pipeline product Water, affect the work of the machine 2. When the power is not in use, the fuse switch needs to be kept closed to ensure the safety of the machine and personnel. 3. Before and after the lubrication, the support rod and the presser ring, the connecting rod frame The joints between the shaft, cylinder joint, and the in-feed and out-feed rollers must be inspected once a week. Lubrication should be performed at the right time to avoid the loss of the machine due to seizure. 4. Cutting oil: The fuel injection group can spray CPC-R32 or saponification oil. The air volume can be adjusted and the left and right oil amount can be controlled separately using aluminum cutting oil or water-soluble cutting oil (saponified oil) 1:20, the proportion can not be too thin, and the water is too heavy to cause rust or stuck. Daily inspection of the oil amount is needed. Is it enough Need to supplement insufficient, sufficient cooling can increase tool life, reduce the aluminum cut burr.
5, keep the table clean to ensure the accuracy of sawing /
6. Check whether the air duct is damaged daily. If it is damaged, replace it with a new air duct to prevent the machine from working properly due to water leakage. 7. The oil drum uses CPC-R68 hydraulic oil and needs to maintain seven full minutes to ensure the cylinder. The movement is smooth, when the fuel is turned off, the gas source is turned off and the cover is removed, the oil cover above the oil drum is opened, the oil is added to the full seven minutes, and the oil cover is closed, and the upper cover can be used.
8. Periodically (preferably once a week) check the belt for excessive wear, parallelism, and if the belt surface pressure is too loose or too tight.
9. If there is any failure or inoperative condition of the pneumatic parts during operation, replace the defective air-pressure parts. 10. The fuel injection cooling system of the machine uses an injector and uses the siphon principle to suck the cooling oil to the nozzle and cool the saw blade. In order to avoid air compressor parts clutter and malfunction.
China Cutting Machine Trading Network is a free trading platform. Cutting machine-related companies can register their products by registering as a member for free. They are more likely to reach online or offline transactions. Please consult for details. Website:/
Editor: zgqgjjywcd