1. Isolate the water source. The measures for isolating the water source can be divided into two methods: leaving the isolated coal (rock) column waterproof and establishing the water barrier curtain with waterproof. 1) The isolated coal (rock) column is waterproof. In order to prevent the various streams of water from entering the well when the coal (mineral) layer is mined, a coal (mineral) column of a certain width or thickness is left in the area threatened by water. The size of the waterproof coal (mine) column should be determined by taking into account the water pressure of the aquifer, the amount of water, the mechanical strength and thickness of the coal (mine), and other relevant regulations, and comprehensively determined through practice. 2) Water-proof curtain belt. The water-proof curtain belt is to pass the pre-made slurry through the angled hole drilled from the roadway to the front, press the crack in the rock layer, the slurry penetrates and diffuses in the pores, and then solidifies and hardens to form a water-proof curtain. The belt serves to isolate the water source. Since the grouting process and the equipment used are relatively simple and effective, it is considered to be one of the effective methods for mine prevention and control of water damage at home and abroad. 2. Mine water inrush interception. In order to prevent sudden flooding during mining, which may cause flooding accidents in the whole mine, waterproof gates and waterproof walls are usually installed at certain positions in the roadway.
Water based adhesives are supplied as pre-mixed solutions, or are formulated as dry powders, which producers and distributors must then mix with water in order to obtain its adhesive properties. These properties are obtained when water is either lost from the glue line by evaporation or is absorbed by the substrate. Because of this, it is important to use at least one permeable substrate when applying water-based adhesives.
Because the polymers in water based adhesives are water soluble, the bonds that are formed between surfaces are more susceptible to moisture and water, although some kinds, like plant and casein glues, are made with a base material that is insoluble at room temperature. Although this has improved the resistance of such adhesives to the effects of water and moisture, water based solution adhesives are still perishable, and therefore contain a shorter storage life.
Water Based Adhesives,Water Based Glue,Water Based Construction Adhesive,Water Based Glue For Paper GUANGZHOU INTERNET WOOD GLUE MANUFACTURER CO. LTD. , https://www.iwghotmelt.com
Water Based Adhesives
Technical measures for isolation and interception of mine water
After the water source is detected, it is not possible to release water due to conditions, or it is possible to release water, but it is not reasonable. Waterproof measures should be taken to isolate the water source and intercept the water flow.