Ion cutter speed is determined by the following factors:
The Y83 series Briquetting Machine is a vertical single master cylinder metal briquetting machine with a master cylinder pressure of 6300KN. This machine is also equipped with an automatic feeding system.Y83 series Briquette Machine is mainly used to directly cold-press metal raw materials such as cast iron scraps, steel scraps, copper scraps, aluminum scraps, and high-quality mineral powder into 3-6 kg cylinders or other shaped cakes through high pressure, so as to facilitate storage. Transportation and reduce the loss of transportation and smelting in the process of recycling and reuse.Our scrap metal recycling machinery can be customized according to customer needs.
Features Vertical Briquette Machine,Vertical Briquette Press,Metal Briquette Compactor,Metal Briquetting Press Jiangsu Dalongkai Technology Co., Ltd. , https://www.dlkhydraumatic.com
1) The model of plasma cutting machine, this model is generally the plasma cutting machine output current size, such as 40A, 60A, 100A, 200A, etc. (Of course, some imported plasma such as Kelber, Germany, the United States Feimart and other brands of some models and The output current is not the size of the model, not elaborate here), according to the size of the model power, the cutting current size is different, the cutting speed is not the same, the above data you did not indicate that you choose is What brand and model of plasma cutting machine, so can not give detailed data;
2) Different materials for cutting the workpiece, according to different cutting materials, the cutting speed is also different, common cutting materials: carbon steel, stainless steel cutting faster, cast iron is slower, followed by aluminum, the slowest is copper, because copper and Aluminum is more difficult to cut, the cutting speed is much slower than the former two, and when the plasma cutting of copper and aluminum with the same power, the cutting thickness is much smaller than stainless steel and carbon steel.
3) The size of the input voltage at the cutting site. Generally, the factory power supply voltage is 380V AC. However, due to the different conditions at each factory site, the general voltage fluctuates from 365V to 410V (of course there is even a larger difference), so the input voltage is also One factor that affects cutting speed.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
1. The electrical part adopts imported PLC automatic control system, which has strong anti-interference ability and low failure rate.
2. The body adopts the overall steel structure, which has high strength and good stability, and does not need to install anchor screws.
3. The machine adopts hydraulic transmission, highly professional integral valve block, and large flow diameter, which reduces the pressure loss of the system and eliminates the drawback of leakage.
4. The use of cartridge valve, electro-hydraulic proportional valve and unique oil circuit design make the hydraulic system perfect, even if it works under long-term heavy load, the system will not be powerless.