The battery is also like a human to have a regular physical examination, so that the basic condition of the battery, we can do it in our hearts. Battery voltage, current, and temperature are important operating parameters of the battery, but it does not reflect the internal state of the battery. Battery internal resistance is the most recognized and most convenient performance parameter for batteries. It can reflect the performance indicators such as battery deterioration and capacity status, and these indicators are not reflected by operating parameters such as voltage, current and temperature. The four main failure modes of the battery: water loss, negative plate vulcanization, positive plate corrosion and thermal runaway have a direct impact on the battery capacity and internal resistance, which is the main reason for the increase in internal resistance of the battery. As the battery capacity state decreases, the internal resistance of the battery will increase. The larger the capacity of the battery, the smaller the internal resistance is reflected, and as the battery deteriorates, the internal resistance of the battery also increases significantly. Therefore, the internal resistance of the battery has a close relationship with its capacity: the increase in internal resistance of the battery is an important indicator of battery performance degradation. By performing an internal resistance test on the battery cells in the battery pack, it is possible to accurately grasp the performance state of each of the battery cells in the battery pack. At the same time, it is of great significance to ensure the stability of the battery power supply and extend the service life of the battery pack. The battery is used in series at most sites. The performance status of the battery directly affects the overall performance of the battery pack. At the same time, the backward battery in the battery pack will accelerate the degradation rate of other batteries connected in series. Therefore, the monitoring of the single battery is a necessary condition for ensuring the capacity status and service life of the battery pack. The quality of the single battery directly affects the performance of the overall battery pack, which is the so-called one-shot movement. Qunling Energy is a company dedicated to battery maintenance testing!
Air valve
The
new double-canisters exhaust valve consists of a big canister and a small one.
When
there is no water in the pipe, the canister in the body drops down to the full
opening place. When water coming in, the air in the body is released from the
big canister, then water can be filled into the pine immediately. When there is
no air in the pipe, water comes into the valve cavity and causes the two
canisters rise up to the closing place. And the big canister stays closed so as
to improve the capacity of transporting water and to economize energy.Since air is
often dissolved into water, when transporting water, the air is released from
water continuously , however, when reaching the quantity, the small canister
will drop down with a small amount of air released from air vents . Otherwise
the air accumulating on the top of the pipe will reduce the pipe system`s
capability of transporting water.
When there is
negative pressure in the pipe, the big canister drops down and the discharge
hole is open. Then the valve takes in air in good time so that it can avoid
affecting normal water supply due to the negative pressure on the pipe.
1.Unique design:
The two canisters are made of non-toxic
engineering plastics of high strength., with concise structure, light weight,
reliable and stable exhausting.
Inside and outside surfaces of the body, cover
and dust-prevented cap are all coated with epoxy resin powder with no iron
exposed. Materials of inner components are made of stainless steel and
engineering plastics so as to prevent corrosion and to ensure purity of media.
The sealed seat, made of bronze, improves the
ability of anti-abrasion, and prolongs service life.
2.Excellent anti-corrosion:
Inside
and outside surfaces of the body, cover and dust-prevented cap are all coated
with epoxy resin powder with no iron exposed
3.Sanitary standard:
Non-toxic epoxy resin powder used
comply with sanitary standard GB/T 17219-1998.The coated resin is in accordance with
standards of drinking water.
4.Tested summary:
The media
is air. In the procedure of the test,
the air temperature shall keep between 5℃ and 45℃. The fluctuation of air flowing value shall be
within 4% and that of the pressure value within 5% while that of air
temperature value within 2%.
Sealing
test at a low pressure. When the
pressure goes up to 0.05 Mpa, 0.1 Mpa, 0.2 Mpa, 0.3 Mpa, 0.4 Mpa, 0.5 Mpa, the
valve maintains the pressure at 12mins with no visually detectable leakage of
the sealed surface.
Repeated
test of exhausting Putting water into
the valve and discharging air every 8-9 seconds. Then increasing the pressure to
1.6 Mpa , keeping it for 2mins before releasing. Conducting leakage test for
250 times with the result that there is no visually detectable leakage and no
structural damage. Then testing the sealing at a high as well as low pressure,
no visually detectable leakage.
Repeated
test of airing Injecting air into the
valve till the valve closes fully, then cutting off the air till the valve open
fully. Repeating leakage tests for about 25000 times with the consequence of no
visually detectable leakage and no structural damage. Then testing the sealing
at a high as well as low pressure, no visually detectable leakage.
Test of the
valve's endurance The valve is poured by
water with a pressure of 1.6 Mpa at a temperature of 50℃and maintaining it for five days, then
checking whether the valve can be normally opened or not after releasing the
pressure.Testing the leakage, resulting in no visually detectable leakage and
no structural damage. Then testing the sealing at a high as well as low
pressure, no visually detectable leakage.
Air Valve,Exhaust Valve,Air Release Valve,Air Valve With Single Orifice SUZHOU YUEDA VALVE CO., LTD. , https://www.jsyuedavalve.com