1) The clearance between the steering knuckle and the knuckle pin shaft should be no more than 0.1mm. 2) The end gap between the steering knuckle and the steering axle is generally 0.05-0.1mm. If the end gap is too large, an adjustment washer can be added for adjustment. 3) Needle bearing between steering knuckle shaft and steering axle, the maximum clearance should be no more than 0.1mm. 4) After the steering axle hub bearing is filled with grease, tighten the hub bearing to adjust the fixing nut. When turning the wheel is difficult, the nut should be returned 1/5 times and the lock washer should be installed. It should be flexible when turning the wheel, and it should be possible to feel the axial gap when the wheel is pulled. 5) Adjust the parallelism of the hub, the error should be no more than 1mm, can be adjusted by adjusting the steering rod screw, and tighten the stop nut after adjustment. 6) Adjust the corner. Lift the steering axle up, turn the hub to the left end position, adjust the steering cylinder piston rod, then pad the spring washer and tighten the nut. EVA Sheet is the most basic material for many EVA foam product. It is widely used in toys, marine, automotive, sports, construction, education and etc.
We can provide different sizes, thickness, hardness and density for the EVA Foam Sheet to meet the different requirements from customers. And with our experience in EVA foam industry, we will also provide a professional EVA foam product solution to customers.
Eva Sheet,Eva Rubber Sheets,Educational Craft Sheet,Eva Packing Foam Sheet,Flexible Eva Foam Sheet,Eva Rubber Sheet Huizhou City Melors Plastic Products Co., Limited , https://www.evadecking.com
Detailed explanation of key elements of assembly and adjustment of forklift steering axle
According to experts, the requirements for the assembly and adjustment of the steering axle of the forklift truck are: after the steering axle is assembled, the parts must have the correct connection and matching clearance.