Gas-Phase Ultrasonic Cleaning Machine.
Heat Exchanger Cleaning Machine Heat Exchanger Cleaning Machine,Automatic Cleaning Machine,Ultrasonic Cleaning Machine,Gas-Phase Ultrasonic Cleaning Machine Wuxi Better Technology Co., Ltd , http://www.btheatexchanger.com
At 9:00 on June 29th, in a garage near Luochang Road, a heavy-duty truck wheel suddenly burst, and an auto-worker who was working was injured in the head. According to industry sources, the accident was caused by excessive tire pressure.
According to Mr. Fan, the owner of the auto repair shop, at 7:30 that same day, a yellow heavy truck with a Yushou D license entered the store, and the owner said that the hub of the last wheel on the left side of the car had a problem.
Subsequently, Mr. Fan let 19-year-old auto mechanic Xiao Ming (a pseudonym) go to repair. Mr. Fan said that he also specially told Xiao Ming that the gas in the tire should be let go before maintenance. However, Xiao Ming did not follow Mr. Fan's embarrassment.
As Xiao Ming repaired the wheel, a muffled sound came from the store, and a burst of broken hubs hit Xiaoming's face. Immediately, Xiaoming's face was bloody and direct.
After the accident, Mr. Fan hurriedly sent Xiao Ming to the First People's Hospital of the city and paid more than 3,000 yuan in medical expenses.
How can an automobile hub burst suddenly? How to prevent it? In this regard, the staff of a garage repair shop on Jiudu Road said that if the tire is full of gas, vehicle overload or tires have been used for years, it may cause the car hub to burst.
In response to the preventive measures for such problems, the staff member suggested that drivers should check more on weekdays and should not be overloaded. The air pressure in the tires should be moderate, and it should be promptly replaced if any problems are found in the hub.
The principle of gas-phase cleaning machine is as
follow. When the solvent is heated, the steam forms the gas phase zone. In this
area, the oil on the surface of the workpiece is dissolved and washed by steam.
When the steam condenses, the dirt along with the grease falls back into the
tank to become the cleaning fluid. Then, the cleaning fluid is heated and
gasified into steam to clean the workpiece. This continuous cycle ensures the
workpiece is always surrounded by the steam of cleaning fluid which overcomes
the problem of contaminated cleaning fluid in the past common cleaning process.
The Ultrasonic Gas-phase Cleaning Machine is sealed
type with manipulator driving transportation rack, loading by special material
baskets, step-type conveying cleaning technology and pneumatic elevator to transport
material. Using organic solvent such as trichloroethylene as the cleaning
medium to degrease the surface of the workpiece. Then having freeze-drying. The
supersonic cleaner is suitable for the cleaning of the Heat Exchanger Parts.