DISC-LOCK locknut is composed of two parts, each part has staggered cams, because the internal wedge design slope angle is greater than the bolt nut angle, this combination will tightly bite into a whole, when vibration occurs When the DISC-LOCK locknut protrusions are misaligned with each other, the lifting tension is generated to achieve a perfect anti-loosening effect. There are also three types of locknuts: The first kind is to use two identical nuts to be screwed on the same bolt, and a tightening torque is added between the two nuts so that the bolt connection is reliable. The second type is a special locking nut that needs to be used with a type of locking washer. The special lock nut is not a hex nut but a round nut. There are 3, 4, 6 or 8 notches on the circumference of the nut (depending on the size of the nut and the manufacturer's product series), this Several gaps are both the focus of the tightening tool and the snap-in of the bayonet washer. The third method is to drill threaded holes (generally two, 90 distributed on the outer surface) from the outer surface of the nut to the inner surface of the threaded surface. It is used to screw in a small-diameter countersunk head screw in order to give the thread. Apply a centripetal force to prevent the lock nut from loosening. A relatively good quality lock nut sold on the market is provided with a small piece of copper which is in line with the thread of the lock nut on the inner round surface of the nut, for avoiding that the radial top screw directly contacts with the locked thread and damages the latter. . This type of lock nut gradually starts to be applied in the case where the shaft end of the rotary motion type is locked, such as the loosening of the ball screw mounting end bearing. The second anti-loosening method is more reliable than the first one, but the structure is relatively complicated. Compared with the first two types, the third bell has the characteristics of better anti-loosening effect, simpler structure, and smaller axial dimension. STRUCTURE: Tube:Oil resistant synthetic rubber Reinforcement:High tensile steel braids or sprials Cover:Synthetic rubber with high abrasion, ozone, weather and heat resistance and an extended operational temperature range. 3.The flexible pipe has excellent bending resistance and fatigue resistance. 4.The hydraulic pipe is soft to use and deforms little under pressure. Hydraulic Hose,Hydraulic Hose Fittings,Hydraulic Hose Assemblies,Fiber Reinforced Rubber Hose Luohe Tiema Hydraulics CO.,Ltd , https://www.hydraulichosesdirect.com
1.The Flexible hose is made of special synthetic rubber and has excellent oil resistance,heat resistance and aging resistance.
2.The high pressure hose has high pressure and superior pulse performance.
Where is the locknut cam?
Hydraulic Hose consists of oil resistant synthetic rubber for inner tube,braided high tensile stell wire for reinforcement,and weather resistant synthetic rubber for wrapped cover. This rubber hose products have feature of oil resistance, high pressure resistance, high temperature resistance, flexibility, good pulse performance , small deformation pressure , fixed length, convenience usage and maintenance and other characteristics, and they are widely used in a variety of heavy vehicles, engineering machinery, petroleum, coal, electric power, metallurgy, chemical industry, shipbuilding, transportation and other industries.
KEY FEATURES