Flexible Design of the Piping When the turbine allows the pipe forces and moments to be determined, the piping design should try to ensure that the pipe forces and moments do not exceed these allowable values. There are usually two types of loads that need to be considered, namely displacement loads due to pipe gravity loads and temperature changes. Under normal circumstances, as long as the proper setting of the support can make the steam turbine basically does not bear the pipe weight load. According to the turbine pipe construction specification, the pipe flange should be opened after the pipe is welded and the parallelism and concentricity of the machine flange and the pipe flange should be checked. If there is skew, measures need to be taken to correct it. Therefore, it can be considered that the steam turbine is not affected by the force and moment of the pipe before the temperature rise, and the temperature and the moment of the pipe are all caused by the thermal expansion of the pipe. The thermal expansion force and moment of the pipe are related to the temperature change amplitude, but also have a close relationship with the flexibility of the pipe itself. The flexibility of the pipeline reflects the ease of elastic deformation of the pipeline. The greater the flexibility of the pipeline, the smaller the counterforce and anti-torque generated when the pipeline is forced to deform. Pipe design should try to ensure that the pipe has a certain degree of flexibility, but it is not easy to design a large flexible pipe, because the increase of pipe flexibility usually requires more elbows and larger turns, which will be limited by the plant space, in addition It is easy to cause other problems, such as increased loss of pressure drop, easy vibration of pipelines, construction costs and material costs, etc. Therefore, the pipeline design also needs to use the hanger, especially the limit frame, to control and redistribute the pipeline deformation and displacement to achieve reduction. The purpose of the small pipe to thermal expansion force and moment of steam turbine. The inlet steam pipe has a higher temperature and a higher pressure and is connected to the steam inlet valve of the steam turbine valve. Turbine valves allow single-side steam intake, as well as left and right simultaneous steam intake, and need to be configured according to the incoming steam volume. Correspondingly, the piping also has two forms of single inlet and double inlet. The double inlet mode makes it easy to arrange the pipelines symmetrically, and it can achieve offset cancellation of partial forces, which is beneficial to the piping design.
Electric mini loader is also a kind of agricultural machinery widely used in rice mills, farms, pastures and other narrow space,
electric loader is mainly used for shoveling rice bran, feed, manure and other loose materials.
Advantage of Electric Mini Loader
1. Stable performance and wide range of use. 2.Deepen the hopper, real materials, worry-free quality. 3. Charging type, easy to operate and easy to use. 5. Wear-resistanttires, strong and durable, quality assurance. 6.It is suitable for operations in small and low spaces such as farming greenhouses for cleaning up manure, gardens,environmental sanitation, river dredging, underground parking lots, etc.
Electric Mini Loader ,Electric Mini Track Loader,Electric Mini Wheel Loader,Electric Front Loader Gongyi Xiaoyi Jinwang Machinery Factory , https://www.jinwangmachines.com
The electric mini loader has the advantages of fast operation speed, high efficiency, good maneuverability and light operation, so the electric loader has become the working machine in the construction of farms, pastures and rice mills.
