The particle counter is an indispensable important equipment in the research of hydraulic pollution control and the development and production of teaching and filtration products in this subject. In China's power, metallurgy, machinery, aerospace and other fields, the monitoring of hydraulic pollution on production lines and on-site has gradually been standardized. Particle counters have been gradually purchased in these areas. At present, from the perspective of the use of particle counters in these units, most of the tests are carried out on a single pollution test project, which provides timely sampling and testing for important hydraulic lubrication systems to ensure normal operation of the units. Over the past decade or so, the great changes in the state of the hydraulic system in many areas of China have proved to be very good. However, the use of a particle counter to measure the degree of contamination of the oil alone is certainly not as high as the test frequency. The low utilization rate of imported equipment purchased for a large amount of money is a waste, and it should be allowed to be used as it can. Plus Wechat controls more relevant information: Guangzhou Frey Auto Parts Co,.Ltd , https://www.freyparts.com
At present, only a few research institutes in China can provide sampling containers for hydraulic technology. However, when the user gets the container, there are many inconveniences in transportation and mail order, and the price is also very expensive. You can create a set of cleaning equipment yourself, such as a 1Lm filter system and some necessary utensils. When confirming the cleaning method or certifying the cleaned container, the standard used is ISO3722 "Identification of Hydraulic Drive - Sample Container Cleaning Method", which is the process of using the "automatic particle counter" many times. Use a container that has been cleaned by you and qualified by yourself to collect the sample on site. Finally, put the container directly into the automatic particle counter sample chamber for testing. It is very practical.
The use of particle counters in addition to purely “measured oil contamination†will greatly benefit the pollution control and personnel involved in this system if they do a good job of these tests. This will enable us to move from general concepts of pollution control to systems engineering. The intrinsic connection and the microscopic mechanism of filtration technology have a deep understanding. The particle counter can not only analyze the oil pollution, but also can discriminate the causes of some oil pollution. This is a breakthrough in the use of particle counters. 