Detachable Garbage Truck Price_Hook Arm Garbage Truck Picture|Video-Chengli Garbage Truck Manufacturers

March 10, 2024

Detachable Garbage Truck Price_Hook Arm Garbage Truck Picture|Video-Chengli Garbage Truck Manufacturers

1. The price of detachable garbage truck is 268,000 yuan. Chengli garbage truck manufacturer provides hook-arm garbage truck pictures|video trucks, total weight (Kg) 18000, curb weight (Kg) 7300, 7800 rated load (Kg) 10505, 10005 Dimensions (mm) 7480 × 2520 × 3090 Approach angle / departure angle (°) 17/19, 17/18 front suspension / rear suspension (mm) 1400/1380 axle load (Kg) 6500/11500 maximum speed (Km /h)89

图片13.png

Second, the use of retractable hook arms to achieve the second hoisting of the trash can, the trash can can be hoisted up and down by itself, and a special sanitation garbage transport vehicle that can dump garbage automatically. The truck is widely used for garbage disposal in urban streets and schools, and is used for the collection, transportation, and unloading of bagged and bulk domestic garbage in cities and towns. One vehicle can be equipped with multiple buckets, and multiple garbage buckets can be placed at each garbage point, with self-unloading function, hydraulic operation, and convenient dumping. 图片14.png

Hydraulic system operation type remote control + manual

Third, the main components: hydraulic oil pump, operating valve, balance valve, hydraulic lock, hook arm main operating cylinder, sleeve arm sliding cylinder, hydraulic oil pipe, hydraulic oil tank, system rated pressure 20MPa/30MPa hydraulic oil tank capacity 120L conventional lifting force T20T hook arm Maximum horizontal sliding distance mm 900/1000mm oil Ml/r80Ml/r hook box time s≤45 unloading time s≤50 dumping angle. 49/50 pull arm hook hook height mm1570 rail width mm1070 control voltage V24V equipment weight kg2000kg

图片3.png


Four, pull arm hook:

1. Components

The pull arm hook is mainly composed of: A: hook arm B: grappling hook C: middle beam D: hydraulic dump lock E: telescopic boom cylinder F: hydraulic box transverse lock G: rear roller H: tilt arm, I: auxiliary beam J: Box self-unloading auxiliary bracket, K: Main cylinder and other structures.

2. Technical features:

A. Advanced structure and hydraulic system design.

B. All operations can be operated remotely (30 meters range), and the operation is simple and convenient.

C. Adequate anti-corrosion treatment measures for structural parts: high-quality paint is sprayed on steel components; metal parts (shaft connectors, hard tubing, hose fittings, bolt joints, etc.) are treated with anti-corrosion and galvanized.

D. Integral castings are used in many places where the friction between the pull arm hook and the box body is relatively concentrated. Castings have good mechanical properties and excellent friction and lubrication properties

E. Kinematics characteristics

(1) The carriage can slide a certain distance horizontally on the guide rail

(2) Horizontal sliding can be used to effectively reduce the height of the center of gravity of the car box in the process of dumping and loading and unloading the box

(3) Carriages with a larger length range can be mounted, thereby improving the efficiency of vehicle utilization

图片4.png

F. Safety device:

(1) The total pressure of the system and each unit valve block are equipped with overload protection.

(2) Lifting cylinders, sliding cylinders, rear box lock cylinders and rear stabilizing devices are equipped with load holding valves. Hook arm sliding, box body self

A hydraulic interlock is set between the functional circuits such as unloading, loading and unloading the box body and rear box locking to avoid misoperation.

(3) Hook: high-strength design, integral manufacturing. The contact surface curve fits the actual movement trajectory, and the hanging and unloading of the box is simpler and more reliable;

3. Reinforced L-arm

4. Horizontal lock of hydraulic box

5: Grappling hook, hook safety block:

6. Middle beam

7. Rear roller:

8. Tilt arm:

9. Deputy beam

10. Main cylinder:

图片7.png

5. Hydraulic system:

The system consists of a hydraulic oil pump, a main control valve, a balance valve, a hydraulic lock, a dump cylinder, a sliding cylinder, a hydraulic oil pipe, a hydraulic oil tank, etc.

1. Balance valve:

2. Hydraulic tubing:

3. Hydraulic oil tank:

4. Sliding cylinder:

5. Lifting cylinders, telescopic cylinders, box locking cylinders and rear roller stabilizing device cylinders are equipped with load holding valves.

6. Control system:

All controls can be easily completed by the driver operating a multi-channel pneumatic valve outside the cab; or using a remote control system, the door can be opened, dumped, locked, etc., anywhere in the cab or within 30 meters from the vehicle Operation.

图片11.png

7. Supporting and stabilizing system behind the roller:

Standard rear axle stabilization device, the roller rear axle stabilizer is installed on the rear suspension tail of the chassis, the main function is to reduce the rear suspension load of the vehicle beam and prevent the vehicle from lifting its head during the operation of the pull arm hook.


Tubing Centralizer

Tubing Centralizer,Esp Systems,Cross Coupling,Tubing Protector

PUYANG RENHE INDUSTRY CO.,LTD , https://www.rhsuckerrod.com