I believe that many riders have had similar experiences in their daily lives. When they refueled, they took a disorientation or carelessness. They added a full box of diesel to the petrol car, and the vehicles automatically switched off after playing for a while. When the fire broke, I could not find it. Because diesel's auto-ignition point is relatively low, it only needs to be ignited by compression ignition. Therefore, there is no spark plug in the diesel engine, and diesel is added to the car. It starts burning when the spark plug has not ignited diesel fuel. It will lead to The pressure in the vehicle combustion chamber is abnormal. What should we do at this time?

In general, when the vehicle is driven by diesel for a period of time after it is mis-added, there will be unusually severe vibrations or accelerations. The most obvious is that the vehicle is directly shut off. The best treatment at this time is to contact the rescue vehicle to pull the vehicle to the repair shop for processing. In addition to the diesel oil inside the tank, the repair plant will need to clean the oil line, and the filter element of the gasoline will also need to be cleaned. Change, but also to do some targeted inspections, but generally do not need to replace the engine, so be careful not to be pitted.

The second is that for some small partners, they have been found to have added oil before driving. The most critical thing at this time is to never give up the car. This can effectively prevent diesel oil from entering the oil circuit. Contact the trailer directly to the 4s shop to drain the diesel, then add the gasoline.

The last step is to add a little to the problem in the process of refueling riders, in fact, do not need to worry too much, if the capacity of adding diesel fuel has not reached 5% of the tank capacity, then this time only need to directly add gasoline Yes, small-capacity diesel will not have much impact. These are the same solutions to be shared today with the riders. The car has mistakenly added a diesel solution. However, in the event of a similar situation, the young partners can use these methods to easily solve the problem.

Moulding Machine

Injection molding machine is by means of screw (or plunger) thrust, has been plasticized molten state of the plastic injection into a closed cavity, the solidification of the finished product. An Injection molding machine, also known as an injection press, is a machine for manufacturing plastic products by the injection molding process. It consists of two main parts, an injection unit and a clamping unit.

Three-color upper molding machine Operation Manual

This machine is specially applied to manufacture single color, double color upper and slippers sandals with PVC or TPR. Its features are as follows:

1.       Full computer controlling, humanized man-machine interface , operating panel is concise;

2.       Compared with the same kind of equipments, it saves electricity and increases efficiency;

3.       Compared with the same kind of equipments, it has larger injection capacity and clamping force;

4.       the rotation of station is characterized by continuously variable speed, has light noise and be steady;

5.       Preparing and injection device are controlled proportionally, besides, the speed, material capacity and pressure are adjustable, which ensures the quality of products;

6.       Can use it to manufacture single color, double color slippers sandals and are free to choose stations to work according to different requirements of products;

7.       Technical Parameters

Moulding Machine

Moulding Machine,Jelly Blow Molding Machine,Mold Machine Foaming Machine,Plastic Mold Machine

SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachine.com