The used car is different from the new car. There is a certain degree of uncertainty in the car condition. Pay attention not only to the used car but also to maintenance after buying it back. It is difficult to know the owner of the used car or the first few car owners. What are the maintenance habits, how to conserve kung-fu, and what kind of maintenance should be done after buying a used car to extend the service life of the car? Then, the editors here will introduce it to you, hoping to help you.

1, change the oil. The first is the car engine oil. The engine oil plays a role in cooling and lubricating the engine components. If the owner is often driving on the freeway, and stops and walks less often, the general engine oil can be used for replacement. However, if the owner needs to drive within the city often, stop and walk more, for engine wear is relatively large, then choose a more advanced motor oil. At the same time, the oil septum should be replaced to ensure that the oil path is smooth and free of impurities. In addition, gearbox oil, brake oil, hydrazine oil, water tank cooling water, water splashing glass, and the like are also replaced. Also, the transmission oil is the most easily overlooked. After purchasing a used car, it is necessary to replace the transmission oil that meets the specifications of the factory. This is especially important for cars over 5 years of age. In the case of a rear-wheel drive, the "tail oil" should be replaced.

2, change tires. Tires are like human feet, and their importance does not need to be emphasized. If you buy a vehicle that is driving more than 60,000 kilometers or has a useful life of more than 5 years, or wears up to 1.6mm, that is, when the tread pattern is worn to the same height as the “△” mark stamped on the shoulder, we recommend that you quickly replace the tire. Now.

3, change appearance, that is, body beauty. After the purchase of a car, it is advisable to go to a car beauty shop, an oil station, or an agent service center to do a thorough waxing or polishing process to make the car rejuvenate and give the owner the feeling of driving a brand new car.

4, taste, that is, compartment disinfection. The deodorization and disinfection of newly purchased used cars should not be overlooked. Commonly, there are vacuum cleaners, vapor deep cleansers, and many other services such as disinfecting wipes and negative ion air purification. After these measures, all kinds of residual odors in the compartments and the atmosphere left by the owner are eliminated.

5, change the torch. The platinum or Iridium metal firearms currently used in cars do not need to be replaced too often. Usually 30,000 kilometers or more need to be replaced, the owner can first remove the fire nozzle for inspection to see if it needs to be replaced.

6, for C and belt pumps. For vehicles with a vehicle age of 5 years or more, or vehicles with a mileage of more than 70,000 kilometers, the safest way is to replace the car with a new C-belt (ie engine timing belt), otherwise C-strap breakage will result in The flaps move up and down the program chaos and collide with the cylinder pistons, so that all engine disk top parts are damaged. While changing the C belt, the pump and belt can be replaced together.

7, change the battery. After buying a used car, pay attention to the date of the battery, or the state of the battery display. When the engine is started, if it is found that the sound is weak or the light is dim, it is a sign that the battery is about to run out and should be replaced as soon as possible.

After some meticulous changes, beauty, disinfection, and deodorization, I believe that your second-hand car is already a brand new look. With sufficient power, you can freely enjoy the convenience and happiness it brings to you.

Wall Mounted Jib Crane is a new suspends and transport equipment based on column mounted jib cranes or floor fixed Jib Crane, its rack is fixed on concrete wall in the factory workshop. Wall Mounted Jib Crane can move in longitudinal way while Electric Hoist can finish transverse movement along horizontal vertical direction.

The wall mounted swing arm jib crane expands the scope of working and uses the space of factory building efficiently, have a better use effect.

Features:

* Capacity: up to 10 ton

* Arm Length: 1-7.5 m

* Lifting Height: up to 18 m

* Cross Rotation Speed: 3-5 r/min

* Lifting Speed: As per hoist(0.8/5 or 0.66/4)

* Temperature: -20 - 60 degree

* Control Method: Pendant Control, Remote Control

* Work Duty: A3, A4, A5

* Power Source: 240-440V, 50/60HZ, AC-3P

* Cantilever: N/A

Parameter for 3ton wall mounted jib crane:

Technical Requirements:

The manufacture and installation are required to meet the technical standard of  JB/T8906-1999 for Slewing Jib Crane.The main beam of operation adopts KBK track; the electric hoist uses CD1-3T steel chain, and uses BLED cycloidal reducer to rotate. The hoist is driving by electricity.

Advantage

1. Reasonable, compact and beautiful structure, Precise and experienced designing

2. Safe and smooth running with safety accessories, smooth starting and stopping performance

3. Low noise, commodious cabin and good view space

4. Maintenance-free for lifting mechanism and excellent changeability for spare parts

5. Energy saving with minimum possible power, suitable for industry power supply around the world

6. Overloading, over-volt, over-current protections included to ensure 100% safety

7. Accurate designing and advanced device to guarantee synchronous running in each side

8. The Jib crane can be customized as your requirement, such as stop as angle (stop every 10 degree, etc), electric or manual, and so on

Wall Mounted Jib Crane

Wall Mounted Jib Crane,Wall Mounted Hoist,Portable Jib Crane Hoist,Wall Mounted Jib Crane Design

Jiangxi Mide Industrial Co., Ltd. , http://www.midecrane.com